DIY Appliance Repair Tips

Wait! Before you get the itch to hire an appliance repair CITY for help, you should be able to keep your household appliances in good shape with the help of the tips below.

1. Smelly Washing Machine

The presence of a foul smell in a washer defeats the point of the appliance! If you’re in the process of attempting to wash your clothing items so they’re fresh and clean, but the machine will not cooperate, run an empty cycle in hot water and pour in 2 cups of white vinegar and half of a cup of baking soda to eliminate the odor. This problem frequently occurs in front-loading washers. To eliminate future odors, crack the door open following cycles to let it dry out.

2. Inefficient Refrigerant

A lukewarm refrigerator in the kitchen is never a good sign. A warm refrigerator will not keep drinks cool or refreshing, and the food inside could also be on the verge of rotting! In some cases, your refrigerator might not need repair; instead the inside could just need to be cleaned out. Or the coils on the back panel of the refrigerator are in need of cleaning.

Unplug the refrigerator and move it away from the wall prior to vacuuming the coils. If you don’t see cooling improvement, it’s time to contact a professional appliance repair technician in CITY.

3. Clicking Igniter on Stove

If the igniter on a gas-powered stove clicks and clicks and the burner won’t light, inspect to be sure the burner top is tightened and properly aligned. You might also notice this if you have had a recent boil over or liquid spill on your stovetop.

If that’s not the case, the cause is likely to be a dirty igniter. To clean the igniter, first take off the burner lid and clear away any particles. You can use a metal clothes pin to pick debris from the grooves of the igniter. If that doesn’t resolve the problem, it’s wise to not disassemble a lighter unless you have the right training; in this case call a professional appliance repair company to diagnose the problem.

4. Broken Garbage Disposal

A garbage disposal includes self-protection in the form of an overload trip switch. If it gets filled up, overheats, is left on for too much time, or has a different issue, the garbage disposal might simply need to be reset rather than repaired. You should be sure the switch is turned OFF. Then, locate the switch on the disposal under the sink and then press the button. If the button does not stay pushed in, just wait 10 minutes and try again. Now, turn on the water from the faucet and then press the switch on.

If the disposal in the sink is clogged with waste and you only hear a humming noise rather than waste grinding, you could need to manually unwind the blades with a hex key to remove the jam. Next, push in the reset button to get the garbage disposal working again. If the tips above fail to get it working like normal, please do not give in to the temptation to push one of your hands down in the disposal to figure things out. Be safe and arrange service with a professional appliance service in CITY.

5. No Power from Outlet

In the kitchen or bathroom, the electrical outlets should be equipped with GFCI switches to protect against harm in wet rooms. If a GFCI electrical outlet isn’t providing power, push in the red button to see if it will restore power.

If not, or if you’re trying on a typical electrical outlet, be certain that a breaker hasn’t been tripped in your breaker panel. If you’re uncertain if a breaker was tripped, switch it to the OFF position and then flip it back into the ON position. Just remember, safety near wiring is critical. If you have any doubts, call a professional.

6. Wobbling Washing Machine

A wobbling washing machine will produce a loud racket and isn’t a productive method to get clean laundry. If your washing machine is suddenly knocking around, the appliance could be broken. To fix this issue, rotate the legs of the appliance to lower or lift each corner until it’s straightened out. One other possible case is the washer is off balance. Crack open the top and move around the clothing items so that they’re dispersed within the drum of the appliance.

Doing this will help the washer to not need to work as hard. If you do attempt to move around the clothing a few times to no avail, do not ignore the issue. You could have a loose motor or drum mount on your hands, which should be easy enough for a professional technician to repair. But continuing to use your washing machine when it has this issue could break other components and cause a more costly repair down the road.

Call for Help

If these suggestions solve your broken appliance, you will want to schedule an appointment from Halo Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts